Struct typenum::uint::UInt

pub struct UInt<U, B> { /* fields omitted */ }

UInt is defined recursively, where B is the least significant bit and U is the rest of the number. Conceptually, U should be bound by the trait Unsigned and B should be bound by the trait Bit, but enforcing these bounds causes linear instead of logrithmic scaling in some places, so they are left off for now. They may be enforced in future.

In order to keep numbers unique, leading zeros are not allowed, so UInt<UTerm, B0> is forbidden.

Example

use typenum::{UInt, UTerm, B0, B1};

type U6 = UInt<UInt<UInt<UTerm, B1>, B1>, B0>;

Implementations

impl<U: Unsigned, B: Bit> UInt<U, B>

pub fn new() -> UInt<U, B>

Instantiates a singleton representing this unsigned integer.

Trait Implementations

impl<U: Unsigned, B: Bit> Add<B0> for UInt<U, B>

U + B0 = U

type Output = UInt<U, B>

The resulting type after applying the + operator.

fn add(self, _: B0) -> Self::Output

Performs the + operation.

impl<U: Unsigned> Add<B1> for UInt<U, B0>

UInt<U, B0> + B1 = UInt<U + B1>

type Output = UInt<U, B1>

The resulting type after applying the + operator.

fn add(self, _: B1) -> Self::Output

Performs the + operation.

impl<U: Unsigned> Add<B1> for UInt<U, B1> where
    U: Add<B1>,
    Add1<U>: Unsigned, 

UInt<U, B1> + B1 = UInt<U + B1, B0>

type Output = UInt<Add1<U>, B0>

The resulting type after applying the + operator.

fn add(self, _: B1) -> Self::Output

Performs the + operation.

impl<Ul: Unsigned, Ur: Unsigned> Add<UInt<Ur, B0>> for UInt<Ul, B0> where
    Ul: Add<Ur>, 

UInt<Ul, B0> + UInt<Ur, B0> = UInt<Ul + Ur, B0>

type Output = UInt<Sum<Ul, Ur>, B0>

The resulting type after applying the + operator.

fn add(self, rhs: UInt<Ur, B0>) -> Self::Output

Performs the + operation.

impl<Ul: Unsigned, Ur: Unsigned> Add<UInt<Ur, B0>> for UInt<Ul, B1> where
    Ul: Add<Ur>, 

UInt<Ul, B1> + UInt<Ur, B0> = UInt<Ul + Ur, B1>

type Output = UInt<Sum<Ul, Ur>, B1>

The resulting type after applying the + operator.

fn add(self, rhs: UInt<Ur, B0>) -> Self::Output

Performs the + operation.

impl<Ul: Unsigned, Ur: Unsigned> Add<UInt<Ur, B1>> for UInt<Ul, B0> where
    Ul: Add<Ur>, 

UInt<Ul, B0> + UInt<Ur, B1> = UInt<Ul + Ur, B1>

type Output = UInt<Sum<Ul, Ur>, B1>

The resulting type after applying the + operator.

fn add(self, rhs: UInt<Ur, B1>) -> Self::Output

Performs the + operation.

impl<Ul: Unsigned, Ur: Unsigned> Add<UInt<Ur, B1>> for UInt<Ul, B1> where
    Ul: Add<Ur>,
    Sum<Ul, Ur>: Add<B1>, 

UInt<Ul, B1> + UInt<Ur, B1> = UInt<(Ul + Ur) + B1, B0>

type Output = UInt<Add1<Sum<Ul, Ur>>, B0>

The resulting type after applying the + operator.

fn add(self, rhs: UInt<Ur, B1>) -> Self::Output

Performs the + operation.

impl<U: Unsigned, B: Bit> Add<UTerm> for UInt<U, B>

UInt<U, B> + UTerm = UInt<U, B>

type Output = UInt<U, B>

The resulting type after applying the + operator.

fn add(self, _: UTerm) -> Self::Output

Performs the + operation.

impl<Ul: Unsigned, Bl: Bit, Ur: Unsigned> BitAnd<Ur> for UInt<Ul, Bl> where
    UInt<Ul, Bl>: PrivateAnd<Ur>,
    PrivateAndOut<UInt<Ul, Bl>, Ur>: Trim, 

Anding unsigned integers. We use our PrivateAnd operator and then Trim the output.

type Output = TrimOut<PrivateAndOut<UInt<Ul, Bl>, Ur>>

The resulting type after applying the & operator.

fn bitand(self, rhs: Ur) -> Self::Output

Performs the & operation.

impl<Ul: Unsigned, Ur: Unsigned> BitOr<UInt<Ur, B0>> for UInt<Ul, B0> where
    Ul: BitOr<Ur>, 

UInt<Ul, B0> | UInt<Ur, B0> = UInt<Ul | Ur, B0>

type Output = UInt<<Ul as BitOr<Ur>>::Output, B0>

The resulting type after applying the | operator.

fn bitor(self, rhs: UInt<Ur, B0>) -> Self::Output

Performs the | operation.

impl<Ul: Unsigned, Ur: Unsigned> BitOr<UInt<Ur, B0>> for UInt<Ul, B1> where
    Ul: BitOr<Ur>, 

UInt<Ul, B1> | UInt<Ur, B0> = UInt<Ul | Ur, B1>

type Output = UInt<Or<Ul, Ur>, B1>

The resulting type after applying the | operator.

fn bitor(self, rhs: UInt<Ur, B0>) -> Self::Output

Performs the | operation.

impl<Ul: Unsigned, Ur: Unsigned> BitOr<UInt<Ur, B1>> for UInt<Ul, B0> where
    Ul: BitOr<Ur>, 

UInt<Ul, B0> | UInt<Ur, B1> = UInt<Ul | Ur, B1>

type Output = UInt<Or<Ul, Ur>, B1>

The resulting type after applying the | operator.

fn bitor(self, rhs: UInt<Ur, B1>) -> Self::Output

Performs the | operation.

impl<Ul: Unsigned, Ur: Unsigned> BitOr<UInt<Ur, B1>> for UInt<Ul, B1> where
    Ul: BitOr<Ur>, 

UInt<Ul, B1> | UInt<Ur, B1> = UInt<Ul | Ur, B1>

type Output = UInt<Or<Ul, Ur>, B1>

The resulting type after applying the | operator.

fn bitor(self, rhs: UInt<Ur, B1>) -> Self::Output

Performs the | operation.

impl<B: Bit, U: Unsigned> BitOr<UTerm> for UInt<U, B>

X | UTerm = X

type Output = Self

The resulting type after applying the | operator.

fn bitor(self, _: UTerm) -> Self::Output

Performs the | operation.

impl<Ul: Unsigned, Bl: Bit, Ur: Unsigned> BitXor<Ur> for UInt<Ul, Bl> where
    UInt<Ul, Bl>: PrivateXor<Ur>,
    PrivateXorOut<UInt<Ul, Bl>, Ur>: Trim, 

Xoring unsigned integers. We use our PrivateXor operator and then Trim the output.

type Output = TrimOut<PrivateXorOut<UInt<Ul, Bl>, Ur>>

The resulting type after applying the ^ operator.

fn bitxor(self, rhs: Ur) -> Self::Output

Performs the ^ operation.

impl<U: Clone, B: Clone> Clone for UInt<U, B>

fn clone(&self) -> UInt<U, B>

Returns a copy of the value.

pub fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<U: Unsigned, B: Bit> Cmp<UInt<U, B>> for UTerm

Zero < Nonzero

type Output = Less

The result of the comparison. It should only ever be one of Greater, Less, or Equal.

fn compare<IM: InternalMarker>(&self, _: &UInt<U, B>) -> Self::Output

impl<Ul: Unsigned, Ur: Unsigned> Cmp<UInt<Ur, B0>> for UInt<Ul, B0> where
    Ul: PrivateCmp<Ur, Equal>, 

UInt<Ul, B0> cmp with UInt<Ur, B0>: SoFar is Equal

type Output = PrivateCmpOut<Ul, Ur, Equal>

The result of the comparison. It should only ever be one of Greater, Less, or Equal.

fn compare<IM: InternalMarker>(&self, rhs: &UInt<Ur, B0>) -> Self::Output

impl<Ul: Unsigned, Ur: Unsigned> Cmp<UInt<Ur, B0>> for UInt<Ul, B1> where
    Ul: PrivateCmp<Ur, Greater>, 

UInt<Ul, B1> cmp with UInt<Ur, B0>: SoFar is Greater

type Output = PrivateCmpOut<Ul, Ur, Greater>

The result of the comparison. It should only ever be one of Greater, Less, or Equal.

fn compare<IM: InternalMarker>(&self, rhs: &UInt<Ur, B0>) -> Self::Output

impl<Ul: Unsigned, Ur: Unsigned> Cmp<UInt<Ur, B1>> for UInt<Ul, B1> where
    Ul: PrivateCmp<Ur, Equal>, 

UInt<Ul, B1> cmp with UInt<Ur, B1>: SoFar is Equal

type Output = PrivateCmpOut<Ul, Ur, Equal>

The result of the comparison. It should only ever be one of Greater, Less, or Equal.

fn compare<IM: InternalMarker>(&self, rhs: &UInt<Ur, B1>) -> Self::Output

impl<Ul: Unsigned, Ur: Unsigned> Cmp<UInt<Ur, B1>> for UInt<Ul, B0> where
    Ul: PrivateCmp<Ur, Less>, 

UInt<Ul, B0> cmp with UInt<Ur, B1>: SoFar is Less

type Output = PrivateCmpOut<Ul, Ur, Less>

The result of the comparison. It should only ever be one of Greater, Less, or Equal.

fn compare<IM: InternalMarker>(&self, rhs: &UInt<Ur, B1>) -> Self::Output

impl<U: Unsigned, B: Bit> Cmp<UTerm> for UInt<U, B>

Nonzero > Zero

type Output = Greater

The result of the comparison. It should only ever be one of Greater, Less, or Equal.

fn compare<IM: InternalMarker>(&self, _: &UTerm) -> Self::Output

impl<U: Debug, B: Debug> Debug for UInt<U, B>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<U: Default, B: Default> Default for UInt<U, B>

fn default() -> UInt<U, B>

Returns the “default value” for a type.

impl<Ur: Unsigned, Br: Bit> Div<UInt<Ur, Br>> for UTerm

type Output = UTerm

The resulting type after applying the / operator.

fn div(self, _: UInt<Ur, Br>) -> Self::Output

Performs the / operation.

impl<Ul: Unsigned, Bl: Bit, Ur: Unsigned, Br: Bit> Div<UInt<Ur, Br>> for UInt<Ul, Bl> where
    UInt<Ul, Bl>: Len,
    Length<UInt<Ul, Bl>>: Sub<B1>,
    (): PrivateDiv<UInt<Ul, Bl>, UInt<Ur, Br>, U0, U0, Sub1<Length<UInt<Ul, Bl>>>>, 

type Output = PrivateDivQuot<UInt<Ul, Bl>, UInt<Ur, Br>, U0, U0, Sub1<Length<UInt<Ul, Bl>>>>

The resulting type after applying the / operator.

fn div(self, rhs: UInt<Ur, Br>) -> Self::Output

Performs the / operation.

impl<Xp, Yp> Gcd<UInt<Yp, B0>> for UInt<Xp, B0> where
    Xp: Gcd<Yp>,
    UInt<Xp, B0>: NonZero,
    UInt<Yp, B0>: NonZero, 

gcd(x, y) = 2*gcd(x/2, y/2) if both x and y even

type Output = UInt<Gcf<Xp, Yp>, B0>

The greatest common divisor.

impl<Xp, Yp> Gcd<UInt<Yp, B0>> for UInt<Xp, B1> where
    UInt<Xp, B1>: Gcd<Yp>,
    UInt<Yp, B0>: NonZero, 

gcd(x, y) = gcd(x, y/2) if x odd and y even

type Output = Gcf<UInt<Xp, B1>, Yp>

The greatest common divisor.

impl<Xp, Yp> Gcd<UInt<Yp, B1>> for UInt<Xp, B0> where
    Xp: Gcd<UInt<Yp, B1>>,
    UInt<Xp, B0>: NonZero, 

gcd(x, y) = gcd(x/2, y) if x even and y odd

type Output = Gcf<Xp, UInt<Yp, B1>>

The greatest common divisor.

impl<Xp, Yp> Gcd<UInt<Yp, B1>> for UInt<Xp, B1> where
    UInt<Xp, B1>: Max<UInt<Yp, B1>> + Min<UInt<Yp, B1>>,
    UInt<Yp, B1>: Max<UInt<Xp, B1>> + Min<UInt<Xp, B1>>,
    Maximum<UInt<Xp, B1>, UInt<Yp, B1>>: Sub<Minimum<UInt<Xp, B1>, UInt<Yp, B1>>>,
    Diff<Maximum<UInt<Xp, B1>, UInt<Yp, B1>>, Minimum<UInt<Xp, B1>, UInt<Yp, B1>>>: Gcd<Minimum<UInt<Xp, B1>, UInt<Yp, B1>>>, 

gcd(x, y) = gcd([max(x, y) - min(x, y)], min(x, y)) if both x and y odd

This will immediately invoke the case for x even and y odd because the difference of two odd numbers is an even number.

type Output = Gcf<Diff<Maximum<UInt<Xp, B1>, UInt<Yp, B1>>, Minimum<UInt<Xp, B1>, UInt<Yp, B1>>>, Minimum<UInt<Xp, B1>, UInt<Yp, B1>>>

The greatest common divisor.

impl<Un, Bn, Ui, Bi> GetBit<UInt<Ui, Bi>> for UInt<Un, Bn> where
    UInt<Ui, Bi>: Copy + Sub<B1>,
    Un: GetBit<Sub1<UInt<Ui, Bi>>>, 

type Output = GetBitOut<Un, Sub1<UInt<Ui, Bi>>>

fn get_bit<IM: InternalMarker>(&self, i: &UInt<Ui, Bi>) -> Self::Output

impl<Un, Bn> GetBit<UTerm> for UInt<Un, Bn> where
    Bn: Copy, 

type Output = Bn

fn get_bit<IM: InternalMarker>(&self, _: &U0) -> Self::Output

impl<U: Hash, B: Hash> Hash for UInt<U, B>

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

pub fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given Hasher.

impl<U: Unsigned, B: Bit> Len for UInt<U, B> where
    U: Len,
    Length<U>: Add<B1>,
    Add1<Length<U>>: Unsigned, 

Length of a bit is 1

type Output = Add1<Length<U>>

The length as a type-level unsigned integer.

fn len(&self) -> Self::Output

This function isn’t used in this crate, but may be useful for others.

impl<U, B, Ur> Max<Ur> for UInt<U, B> where
    U: Unsigned,
    B: Bit,
    Ur: Unsigned,
    UInt<U, B>: Cmp<Ur> + PrivateMax<Ur, Compare<UInt<U, B>, Ur>>, 

type Output = PrivateMaxOut<UInt<U, B>, Ur, Compare<UInt<U, B>, Ur>>

The type of the maximum of Self and Rhs

fn max(self, rhs: Ur) -> Self::Output

Method returning the maximum

impl<U, B, Ur> Min<Ur> for UInt<U, B> where
    U: Unsigned,
    B: Bit,
    Ur: Unsigned,
    UInt<U, B>: Cmp<Ur> + PrivateMin<Ur, Compare<UInt<U, B>, Ur>>, 

type Output = PrivateMinOut<UInt<U, B>, Ur, Compare<UInt<U, B>, Ur>>

The type of the minimum of Self and Rhs

fn min(self, rhs: Ur) -> Self::Output

Method returning the minimum

impl<U: Unsigned, B: Bit> Mul<B0> for UInt<U, B>

UInt * B0 = UTerm

type Output = UTerm

The resulting type after applying the * operator.

fn mul(self, _: B0) -> Self::Output

Performs the * operation.

impl<U: Unsigned, B: Bit> Mul<B1> for UInt<U, B>

UInt * B1 = UInt

type Output = UInt<U, B>

The resulting type after applying the * operator.

fn mul(self, _: B1) -> Self::Output

Performs the * operation.

impl<Ul: Unsigned, B: Bit, Ur: Unsigned> Mul<UInt<Ur, B>> for UInt<Ul, B0> where
    Ul: Mul<UInt<Ur, B>>, 

UInt<Ul, B0> * UInt<Ur, B> = UInt<(Ul * UInt<Ur, B>), B0>

type Output = UInt<Prod<Ul, UInt<Ur, B>>, B0>

The resulting type after applying the * operator.

fn mul(self, rhs: UInt<Ur, B>) -> Self::Output

Performs the * operation.

impl<Ul: Unsigned, B: Bit, Ur: Unsigned> Mul<UInt<Ur, B>> for UInt<Ul, B1> where
    Ul: Mul<UInt<Ur, B>>,
    UInt<Prod<Ul, UInt<Ur, B>>, B0>: Add<UInt<Ur, B>>, 

UInt<Ul, B1> * UInt<Ur, B> = UInt<(Ul * UInt<Ur, B>), B0> + UInt<Ur, B>

type Output = Sum<UInt<Prod<Ul, UInt<Ur, B>>, B0>, UInt<Ur, B>>

The resulting type after applying the * operator.

fn mul(self, rhs: UInt<Ur, B>) -> Self::Output

Performs the * operation.

impl<U: Unsigned, B: Bit> Mul<UTerm> for UInt<U, B>

UInt<U, B> * UTerm = UTerm

type Output = UTerm

The resulting type after applying the * operator.

fn mul(self, _: UTerm) -> Self::Output

Performs the * operation.

impl<U: Ord, B: Ord> Ord for UInt<U, B>

fn cmp(&self, other: &UInt<U, B>) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

pub fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

pub fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

pub fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl<Ur: Unsigned, Br: Bit> PartialDiv<UInt<Ur, Br>> for UTerm

type Output = UTerm

The type of the result of the division

fn partial_div(self, _: UInt<Ur, Br>) -> Self::Output

Method for performing the division

impl<Ul: Unsigned, Bl: Bit, Ur: Unsigned, Br: Bit> PartialDiv<UInt<Ur, Br>> for UInt<Ul, Bl> where
    UInt<Ul, Bl>: Div<UInt<Ur, Br>> + Rem<UInt<Ur, Br>, Output = U0>, 

type Output = Quot<UInt<Ul, Bl>, UInt<Ur, Br>>

The type of the result of the division

fn partial_div(self, rhs: UInt<Ur, Br>) -> Self::Output

Method for performing the division

impl<U: PartialEq, B: PartialEq> PartialEq<UInt<U, B>> for UInt<U, B>

fn eq(&self, other: &UInt<U, B>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &UInt<U, B>) -> bool

This method tests for !=.

impl<U: PartialOrd, B: PartialOrd> PartialOrd<UInt<U, B>> for UInt<U, B>

fn partial_cmp(&self, other: &UInt<U, B>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

pub fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

pub fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

pub fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

pub fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<U: Unsigned, B: Bit> Pow<UInt<U, B>> for f32

type Output = f32

The result of the exponentiation.

fn powi(self, _: UInt<U, B>) -> Self::Output

This function isn’t used in this crate, but may be useful for others. It is implemented for primitives.

impl<U: Unsigned, B: Bit> Pow<UInt<U, B>> for f64

type Output = f64

The result of the exponentiation.

fn powi(self, _: UInt<U, B>) -> Self::Output

This function isn’t used in this crate, but may be useful for others. It is implemented for primitives.

impl<U: Unsigned, B: Bit> Pow<UInt<U, B>> for i64

type Output = i64

The result of the exponentiation.

fn powi(self, _: UInt<U, B>) -> Self::Output

This function isn’t used in this crate, but may be useful for others. It is implemented for primitives.

impl<U: Unsigned, B: Bit> Pow<UInt<U, B>> for isize

type Output = isize

The result of the exponentiation.

fn powi(self, _: UInt<U, B>) -> Self::Output

This function isn’t used in this crate, but may be useful for others. It is implemented for primitives.

impl<U: Unsigned, B: Bit> Pow<UInt<U, B>> for u8

type Output = u8

The result of the exponentiation.

fn powi(self, _: UInt<U, B>) -> Self::Output

This function isn’t used in this crate, but may be useful for others. It is implemented for primitives.

impl<U: Unsigned, B: Bit> Pow<UInt<U, B>> for u16

type Output = u16

The result of the exponentiation.

fn powi(self, _: UInt<U, B>) -> Self::Output

This function isn’t used in this crate, but may be useful for others. It is implemented for primitives.

impl<U: Unsigned, B: Bit> Pow<UInt<U, B>> for u32

type Output = u32

The result of the exponentiation.

fn powi(self, _: UInt<U, B>) -> Self::Output

This function isn’t used in this crate, but may be useful for others. It is implemented for primitives.

impl<U: Unsigned, B: Bit> Pow<UInt<U, B>> for u64

type Output = u64

The result of the exponentiation.

fn powi(self, _: UInt<U, B>) -> Self::Output

This function isn’t used in this crate, but may be useful for others. It is implemented for primitives.

impl<U: Unsigned, B: Bit> Pow<UInt<U, B>> for usize

type Output = usize

The result of the exponentiation.

fn powi(self, _: UInt<U, B>) -> Self::Output

This function isn’t used in this crate, but may be useful for others. It is implemented for primitives.

impl<U: Unsigned, B: Bit> Pow<UInt<U, B>> for i8

type Output = i8

The result of the exponentiation.

fn powi(self, _: UInt<U, B>) -> Self::Output

This function isn’t used in this crate, but may be useful for others. It is implemented for primitives.

impl<U: Unsigned, B: Bit> Pow<UInt<U, B>> for i16

type Output = i16

The result of the exponentiation.

fn powi(self, _: UInt<U, B>) -> Self::Output

This function isn’t used in this crate, but may be useful for others. It is implemented for primitives.

impl<U: Unsigned, B: Bit> Pow<UInt<U, B>> for i32

type Output = i32

The result of the exponentiation.

fn powi(self, _: UInt<U, B>) -> Self::Output

This function isn’t used in this crate, but may be useful for others. It is implemented for primitives.

impl<Ur: Unsigned, Br: Bit> Rem<UInt<Ur, Br>> for UTerm

type Output = UTerm

The resulting type after applying the % operator.

fn rem(self, _: UInt<Ur, Br>) -> Self::Output

Performs the % operation.

impl<Ul: Unsigned, Bl: Bit, Ur: Unsigned, Br: Bit> Rem<UInt<Ur, Br>> for UInt<Ul, Bl> where
    UInt<Ul, Bl>: Len,
    Length<UInt<Ul, Bl>>: Sub<B1>,
    (): PrivateDiv<UInt<Ul, Bl>, UInt<Ur, Br>, U0, U0, Sub1<Length<UInt<Ul, Bl>>>>, 

type Output = PrivateDivRem<UInt<Ul, Bl>, UInt<Ur, Br>, U0, U0, Sub1<Length<UInt<Ul, Bl>>>>

The resulting type after applying the % operator.

fn rem(self, rhs: UInt<Ur, Br>) -> Self::Output

Performs the % operation.

impl<U: Unsigned, B: Bit> Shl<B0> for UInt<U, B>

Shifting left any unsigned by a zero bit: U << B0 = U

type Output = UInt<U, B>

The resulting type after applying the << operator.

fn shl(self, _: B0) -> Self::Output

Performs the << operation.

impl<U: Unsigned, B: Bit> Shl<B1> for UInt<U, B>

Shifting left a UInt by a one bit: UInt<U, B> << B1 = UInt<UInt<U, B>, B0>

type Output = UInt<UInt<U, B>, B0>

The resulting type after applying the << operator.

fn shl(self, _: B1) -> Self::Output

Performs the << operation.

impl<U: Unsigned, B: Bit, Ur: Unsigned, Br: Bit> Shl<UInt<Ur, Br>> for UInt<U, B> where
    UInt<Ur, Br>: Sub<B1>,
    UInt<UInt<U, B>, B0>: Shl<Sub1<UInt<Ur, Br>>>, 

Shifting left UInt by UInt: X << Y = UInt(X, B0) << (Y - 1)

type Output = Shleft<UInt<UInt<U, B>, B0>, Sub1<UInt<Ur, Br>>>

The resulting type after applying the << operator.

fn shl(self, rhs: UInt<Ur, Br>) -> Self::Output

Performs the << operation.

impl<U: Unsigned, B: Bit> Shl<UTerm> for UInt<U, B>

Shifting left UInt by UTerm: UInt<U, B> << UTerm = UInt<U, B>

type Output = UInt<U, B>

The resulting type after applying the << operator.

fn shl(self, _: UTerm) -> Self::Output

Performs the << operation.

impl<U: Unsigned, B: Bit> Shr<B0> for UInt<U, B>

Shifting right any unsigned by a zero bit: U >> B0 = U

type Output = UInt<U, B>

The resulting type after applying the >> operator.

fn shr(self, _: B0) -> Self::Output

Performs the >> operation.

impl<U: Unsigned, B: Bit> Shr<B1> for UInt<U, B>

Shifting right a UInt by a 1 bit: UInt<U, B> >> B1 = U

type Output = U

The resulting type after applying the >> operator.

fn shr(self, _: B1) -> Self::Output

Performs the >> operation.

impl<U: Unsigned, B: Bit, Ur: Unsigned, Br: Bit> Shr<UInt<Ur, Br>> for UInt<U, B> where
    UInt<Ur, Br>: Sub<B1>,
    U: Shr<Sub1<UInt<Ur, Br>>>, 

Shifting right UInt by UInt: UInt(U, B) >> Y = U >> (Y - 1)

type Output = Shright<U, Sub1<UInt<Ur, Br>>>

The resulting type after applying the >> operator.

fn shr(self, rhs: UInt<Ur, Br>) -> Self::Output

Performs the >> operation.

impl<U: Unsigned, B: Bit> Shr<UTerm> for UInt<U, B>

Shifting right UInt by UTerm: UInt<U, B> >> UTerm = UInt<U, B>

type Output = UInt<U, B>

The resulting type after applying the >> operator.

fn shr(self, _: UTerm) -> Self::Output

Performs the >> operation.

impl<U: Unsigned, B: Bit> Sub<B0> for UInt<U, B>

UInt - B0 = UInt

type Output = UInt<U, B>

The resulting type after applying the - operator.

fn sub(self, _: B0) -> Self::Output

Performs the - operation.

impl<U: Unsigned, B: Bit> Sub<B1> for UInt<UInt<U, B>, B1>

UInt<U, B1> - B1 = UInt<U, B0>

type Output = UInt<UInt<U, B>, B0>

The resulting type after applying the - operator.

fn sub(self, _: B1) -> Self::Output

Performs the - operation.

impl Sub<B1> for UInt<UTerm, B1>

UInt<UTerm, B1> - B1 = UTerm

type Output = UTerm

The resulting type after applying the - operator.

fn sub(self, _: B1) -> Self::Output

Performs the - operation.

impl<U: Unsigned> Sub<B1> for UInt<U, B0> where
    U: Sub<B1>,
    Sub1<U>: Unsigned, 

UInt<U, B0> - B1 = UInt<U - B1, B1>

type Output = UInt<Sub1<U>, B1>

The resulting type after applying the - operator.

fn sub(self, _: B1) -> Self::Output

Performs the - operation.

impl<Ul: Unsigned, Bl: Bit, Ur: Unsigned> Sub<Ur> for UInt<Ul, Bl> where
    UInt<Ul, Bl>: PrivateSub<Ur>,
    PrivateSubOut<UInt<Ul, Bl>, Ur>: Trim, 

Subtracting unsigned integers. We just do our PrivateSub and then Trim the output.

type Output = TrimOut<PrivateSubOut<UInt<Ul, Bl>, Ur>>

The resulting type after applying the - operator.

fn sub(self, rhs: Ur) -> Self::Output

Performs the - operation.

impl<U, B> ToInt<i16> for UInt<U, B> where
    U: Unsigned,
    B: Bit, 

fn to_int() -> i16

Method returning the concrete value for the type.

impl<U, B> ToInt<i32> for UInt<U, B> where
    U: Unsigned,
    B: Bit, 

fn to_int() -> i32

Method returning the concrete value for the type.

impl<U, B> ToInt<i64> for UInt<U, B> where
    U: Unsigned,
    B: Bit, 

fn to_int() -> i64

Method returning the concrete value for the type.

impl<U, B> ToInt<i8> for UInt<U, B> where
    U: Unsigned,
    B: Bit, 

fn to_int() -> i8

Method returning the concrete value for the type.

impl<U, B> ToInt<u16> for UInt<U, B> where
    U: Unsigned,
    B: Bit, 

fn to_int() -> u16

Method returning the concrete value for the type.

impl<U, B> ToInt<u32> for UInt<U, B> where
    U: Unsigned,
    B: Bit, 

fn to_int() -> u32

Method returning the concrete value for the type.

impl<U, B> ToInt<u64> for UInt<U, B> where
    U: Unsigned,
    B: Bit, 

fn to_int() -> u64

Method returning the concrete value for the type.

impl<U, B> ToInt<u8> for UInt<U, B> where
    U: Unsigned,
    B: Bit, 

fn to_int() -> u8

Method returning the concrete value for the type.

impl<U, B> ToInt<usize> for UInt<U, B> where
    U: Unsigned,
    B: Bit, 

fn to_int() -> usize

Method returning the concrete value for the type.

impl<U: Unsigned, B: Bit> Unsigned for UInt<U, B>

const U8: u8

const U16: u16

const U32: u32

const U64: u64

const USIZE: usize

const I8: i8

const I16: i16

const I32: i32

const I64: i64

const ISIZE: isize

fn to_u8() -> u8

fn to_u16() -> u16

fn to_u32() -> u32

fn to_u64() -> u64

fn to_usize() -> usize

fn to_i8() -> i8

fn to_i16() -> i16

fn to_i32() -> i32

fn to_i64() -> i64

fn to_isize() -> isize

impl<U: Copy, B: Copy> Copy for UInt<U, B>

impl<U: Eq, B: Eq> Eq for UInt<U, B>

impl<U: Unsigned, B: Bit> NonZero for UInt<U, B>

impl PowerOfTwo for UInt<UTerm, B1>

impl<U: Unsigned + PowerOfTwo> PowerOfTwo for UInt<U, B0>

impl<U, B> StructuralEq for UInt<U, B>

impl<U, B> StructuralPartialEq for UInt<U, B>